Canopy Construction Skills and Methods of Extraordinary Camping

One. A brief description of the steps to build Canopy
1. First lay the Outdoor Camping Tent on the ground (the black rubber surface is flushed down), and determine the central axis of the tent and the connection points of the tent poles.

2. Select the ground nail point according to the product description, as far away as possible, and bolt the wind rope. The angle of the wind rope should preferably expand in the shape of a "meter".

3. Lift the canopy pole up to the canopy and adjust the length of the wind rope.

210 Encrypted Pu Canopy

Two. Points to pay attention to when building a Waterproof canopy
1. Estimate the required area
First of all, you need to know the length and width of the canopy. While the area of the construction site is larger than the canopy, the grounding position of the wind rope should also be reserved. Generally, the wind rope has two functions, to ensure the uprightness of the sky curtain pole and to ensure the normal deployment of the sky curtain. When connecting to the sky curtain pole, it is necessary to ensure that the included angle is greater than 45°; The larger the area, the larger the projected area.

2. Location requirements
Because the canopy needs to be flattened on the ground first in the actual construction, it is necessary to make sure that the ground is flat, clean, free of garbage, sharp branches, etc., to prevent the canopy from being pierced during the tiling process.

3. Use of wind rope buckle
There are many kinds of wind rope adjustment buckles, no matter which one is used to adjust the length of the wind rope. First hang the wind rope on the ground nail hook, pay attention not to tie it, and then move the wind rope buckle (after the rope is stressed, the wind rope buckle will be automatically fixed), so that the wind rope can reach a moderate force.

4. The center line of the canopy and the bolted joint of the canopy pole
There is usually a sewing line on the center line of the canopy. Generally, the center line is the folding position of the canopy. Be careful not to change the construction method to prevent the canopy from being torn under extreme circumstances. Regarding the bolting points of the canopy rods, generally the canopy manufacturers will place them on the canopy for the fastest positioning of the user. Leave small marks, such as logo, brand name, etc.

5. Canopy pole length
Regarding the length, I have tried two types of 2.4m and 2.8m. After the 2.4m is built, because the canopy will sag to a certain extent, people need to bend down under the canopy. The 2.8m does not have such problems. So I personally recommend about 3 meters.

For more information, please contact us:
Tel: 86-0750-8219328
Mobile Phone: +8613702290788
Email: admin@tentodm.com